Технические параметры: Magewell Pro Convert HDMI 4K Plus

Характеристики ввода и Loop-through

  • Max input & loop through signal: 4096x2160 60fps 4:4:4 8-bit
  • Input video at any format by custom EDID of input port
  • Video formats: RGB, YUV BT.601/709/2020
  • 8-channel HDMI-embedded audio
  • HDMI interfaces: HDMI 1.4/2.0, DVI-D

Особенности NDI® кодирования

  • Encoding Full NDI real-time stream at up to
    • 4096x2160 60fps 4:2:2 8-bit
    • 1920x1080 240fps 4:2:2 8-bit
  • Output the same resolution as input or any custom resolution. Typical outputs include:
    • 4096x2160p/3840x2160p/2048x1080p 23.98/24/25/29.97/30/50/59.94/60
    • 1920x1080p/1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
    • 1920x1080i 25/29.97/30/50/59.94/60
    • 720x480p/720x480i 59.94/60/119.88/120
    • 720x576p/720x576i 50/100
  • Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
  • Encoding 8-channel NDI-embedded audio
  • Support NDI 5.x

Управление конфигурацией

  • Register with Magewell Cloud
  • Remote control via WebUI and Magewell Cloud
  • Provide comprehensive information regarding the device and input signals in real-time
  • Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection
  • Update firmware
  • Support USB RNDIS/ECM
  • Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provide HTTP APIs

Встроенные кнопки управления

  • 16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ-управление

  • Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
  • Mini-DIN–8 jack (shared with Tally light)

Сетевые интерфейсы

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

USB-интерфейс

  • USB2.0 Type B
    • 5V/2.1A power supply
    • USB RNDIS/ECM

Поддерживаемые приложения

  • NDI Studio Monitor
  • OBS
  • vMix
  • Any other NDI-enabled product

LED-индикаторы

  • Status LEDs indicate:
    • Power supply: on/off
    • Tally: preview/program
    • Input signal: locked/unlocked
    • Loop through signal: device connected and signal detected/undetected

Форм-фактор

  • 117.5mm (L) x 66.7mm (W) x 23.4mm (H)

Аксессуары

  • USB 2.0 A to B cable
  • 5V/2.1A power adaptor
  • Mini-DIN 8 breakout cable
  • Tally light
  • L-bracket

Крепежное отверстие

  • ¼–20 threaded hole

Потребляемая мощность

  • 5V max current: ~2A
  • Max power consumption: ~10W

Рабочая среда

  • Operating temperature: 0 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing